Building Basics P. 2
Hey, folks! Back with a quick follow-up to the buildings tutorial. Now, as I said previously, If you’re looking to […]
Tutorial Articles
Blueprints: Gepard
>INCOMING TRANSMISSION >PRIORITY ONE >CODENAME: GEPARD >LANDING GEAR ONLINE >TURRET ONLINE […]
Bondo Bonanza
Hey, folks – today instead of posting a tutorial, I’m going to place you in the capable hands of Mack […]
Blueprints: Monitor
>INCOMING TRANSMISSION >PRIORITY ONE >CODENAME: MONITOR >MAGNETS ONLINE […]
Building Basics
Hey, folks! Today we’re going to quickly tackle our buildings, the first few of which are currently on sale. Let’s […]
3D-Printed FAQ
So you’ve heard of 3D-printed miniatures (or you’ve heard of us) but you’d like some stuff cleared up before you […]
Gepard Build Log P. 3
Here we continue onto the fun part — paint! Our dropship is now prepped, surface-wise to the degree we’re happy with, and we’ve kept it unassembled. So, for the next step, I took my black dry pigment and roughly applied it along all the panel lines. No subtlety here — we’ll tone it down soon enough. […]
Gepard Build Log P. 2
Let’s continue with our build. The next step is simple: It’s rinse and repeat of the last step. We’re basically going to apply putty, scuff with 400 grit to knock off peaks, prime, and sand with 400 grit until we’re happy. […]
Gepard Build Log P. 1
Over the next several posts, I’m going to walk y’all through a build of our (version 1) Gepard Dropship. Since this log was written, some changes have been made, but those will be covered in a different log, as most of the steps are the same. […]
